Tesla 4000 String Configuration Tool

Order String
TESLA 4000 aa-bb-c-d-e-ff-g-h-i-j-k

Please build the order string by completing the steps below

Click here to see order template [PDF]

Input Channels:

18: 18 analog inputs, 32 digital inputs, 4 digital outputs
36: 36 analog inputs, 64 digital inputs, 8 digital outputs

Flash memory:

04: 4 GB flash memory (default)
16: 16 GB flash memory

LAN Redundancy Selection:

Network port redundancy on rear Ethernet port 401 is available as an option. When redundancy is selected, choose between RSTP, PRP and HSR redundancy protocols.

0: No redundancy (default)
1: RSTP Redundancy on Ethernet ports 401 and 411 (Internal modem not available if selected)
2: PRP Redundancy on Ethernet ports 401 and 411 (Internal modem not available if selected)
3: HSR Redundancy on Ethernet ports 401 and 411 (Internal modem not available if selected)

LAN Media Selection:

Select the type of communication media on the TESLA’s rear network ports. Choose between copper twisted pair (RJ45) and fiber optic interfaces using the available selections below.

0: Cu - Op => port 401 = 100BASE-T (RJ45), port 402 = 100BASE-FX (multimode, 1300 nm, ST) (default)
1: Op - Op => ports 401 & 402 = 100BASE-FX (multimode, 1300 nm, ST)
2: Cu - Cu => ports 401 & 402 = 100BASE-T (RJ45)

3: Cu - Op => ports 401 & 411 = 100BASE-T (RJ45), port 402 = 100BASE-FX (multimode, 1300 nm, LC) (default)
4: Op - Op => ports 401, 402 & 411 = 100BASE-FX (multimode, 1300 nm, LC)

Internal Modem:

0: No internal modem (default)

1: Factory installed modem

Operating Frequency:

50: 50 Hertz
60: 60 Hertz

CE Conformance:

TESLA external inputs and output contacts are rated to 300Vdc. However, for CE compliance applications, external inputs and output contacts are restricted to below 150V. This restriction is printed on the rear label of CE compliance labeled units.

0: Not CE marked (Upper limit of 300 Vdc on External Inputs) (default)

1: CE marked (Upper limit of 150 Vdc on External Inputs)

Conformal Coating:

0: Not conformal coated (default)

1: Conformal coated

Custom Firmware Request:

0: Latest version (default)
1: Custom version (please mention firmware version number)

Custom Hardware Request:

0: No special build instructions (default)
1: Special build instructions (please mention special instructions)